43310600 EasyCharge 6A-1
Lagerstatus:
Loading
SKU:#
BL369369
Print Veil. pris kr 1 537,00 Veil. pris kr 1 537,00 kr 1 499,00
| Merke: | Mastervolt |
|---|---|
| Produkt: | Lader |
| Enhet: | 1stk. |
| Referanse: | 43310600 |
EasyCharge 6A
Waterproof fixed-mount battery chargers
The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meeting global regulations like CE, CSA, CEC, and ABYC. The output is completely isolated, and can be used in either series or parallel for higher voltage or current.
Highly efficient and simple to use, these chargers are designed for harsh environments, and are fully salt, shock and vibration tested. Currently, 6 A single bank and 10 A dual bank type models are available.
The battery chargers have the ability to charge wet, AGM and Gel batteries, with a universal input (120-230 V) for total worldwide freedom.
Features
Entry level model with Mastervolt 3-step+ charge characteristic.
Suitable for charging Gel, AGM and flooded batteries.
Full power up to 40 °C.
Quick charging function to extend battery life.
Includes cable & Euro plug (optionally also available with UK plug).
Can charge one battery bank.
Series and parallel configuration.
Stain resistant and waterproof.
International certification.
Specifications
General specifications
Total charge current
6 A at 12 V
Recommended battery capacity: charge (based on 50% discharged battery)
to 120 Ah
Nominal input voltage
120/230 V (90-265 V), 50/60 Hz
AC connection
1.2 m (4 ft) cable + Euro plug
DC connection
ring terminals
Galvanic isolation
yes
Dimensions, hxwxd
76 x 152 x 51 mm
3.0 x 6.0 x 2.0 inch
Weight
1.8 kg
4.0 lb
Compliance
CE, ABYC
Optional
also available with UK plug, product code 43310602
Technical specifications
Charge characteristic
IUoUo, automatic 3-step+ for Gel/AGM/flooded
Temperature range (ambient temp.)
-20 °C to 50 °C
-4 °F to 122 °F
Protection degree
IP68
Protections
spark free, short circuit, reverse polarity, over voltage, current limited, over temperature
MasterBus compatible
no
Waterproof fixed-mount battery chargers
The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meeting global regulations like CE, CSA, CEC, and ABYC. The output is completely isolated, and can be used in either series or parallel for higher voltage or current.
Highly efficient and simple to use, these chargers are designed for harsh environments, and are fully salt, shock and vibration tested. Currently, 6 A single bank and 10 A dual bank type models are available.
The battery chargers have the ability to charge wet, AGM and Gel batteries, with a universal input (120-230 V) for total worldwide freedom.
Features
Entry level model with Mastervolt 3-step+ charge characteristic.
Suitable for charging Gel, AGM and flooded batteries.
Full power up to 40 °C.
Quick charging function to extend battery life.
Includes cable & Euro plug (optionally also available with UK plug).
Can charge one battery bank.
Series and parallel configuration.
Stain resistant and waterproof.
International certification.
Specifications
General specifications
Total charge current
6 A at 12 V
Recommended battery capacity: charge (based on 50% discharged battery)
to 120 Ah
Nominal input voltage
120/230 V (90-265 V), 50/60 Hz
AC connection
1.2 m (4 ft) cable + Euro plug
DC connection
ring terminals
Galvanic isolation
yes
Dimensions, hxwxd
76 x 152 x 51 mm
3.0 x 6.0 x 2.0 inch
Weight
1.8 kg
4.0 lb
Compliance
CE, ABYC
Optional
also available with UK plug, product code 43310602
Technical specifications
Charge characteristic
IUoUo, automatic 3-step+ for Gel/AGM/flooded
Temperature range (ambient temp.)
-20 °C to 50 °C
-4 °F to 122 °F
Protection degree
IP68
Protections
spark free, short circuit, reverse polarity, over voltage, current limited, over temperature
MasterBus compatible
no
Waterproof fixed-mount battery chargers The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meeting global regulations like CE, CSA, CEC, and ABYC. The outputs are completely isolated, and can be used in either series or parallel for higher voltage or current, including 12 or 24V outputs. Highly efficient and simple to use, these chargers are designed for harsh environments, and are fully salt, shock and vibration tested. Currently, 6A single bank and 10A dual bank types models are available. A key feature is the ‘sense and send’ technology, which allows the chargers to detect which batteries need the most charge and prioritise accordingly. The battery chargers have the ability to charge wet, AGM and Gel batteries, with a universal input (120-230V) for total worldwide freedom. Features, Entry level model with Mastervolt 3-step+ charge characteristic. , Suitable for charging Gel, AGM and flooded batteries. , Full power up to 40 C. , Quick charging function to extend battery life. , Includes cable & Euro plug. , Can charge one or two battery banks. , Sense-Send (10A model): determines which battery is being charged first. , Series and parallel configuration. , Stain resistant and waterproof. , International certification.
Easy Charge
Privat normalpakker til postkontor koster 99,-
Bedriftspakker med utlevering koster 199,-
Pakker sendes med GLS/Bring. Alle pakker sendes som forsikret gods og med Track & Trace. Pakker til privatpersoner leveres til nærmeste Postkontor/Post i butikk.
Retur
Privatkunder har 14 dagers returrett. Elektronisk meddelelse om benyttelse av angrerett skal være oss i hende innenfor 14 dager etter at du mottar dine varer. Herfra har man 14 dager til å sende/innlevere pakken til oss.
Returretten gjelder ikke spesialproduserte varer og varer produsert etter kundens ønsker/krav/spesifikasjoner.
Ovenstående returregler gjelder for privatpersoner. Det gis ikke returrett ved firmakjøp.
